Wall panel - Perfect Panel is manufactured on the basis of chipboard or LDF board covered on one side with decorative film.
Long sides are profiled during processing to form tongues and grooves and short sides are finished to have a lap joint.
| Type | Cross-section | Base material | Long sides | Short sides |
|---|---|---|---|---|
| P3 |
| LDF | tongue and groove | lap joint |
APPLICATION:
Wall panels are designed mainly to cover interior walls, but they can be also laid on ceilings.
Wall panels are not suitable for rooms where the relative humidity exceeds 70%, i.e. in bathrooms, saunas, laundry rooms, etc. and lose to the sources of heat.
Installation, use and maintenance of the wall panels should be carried out in accordance with the detailed company's manual regarding the wall panel installation.
PACKAGING AND TRANSPORT:
Wall panels are put in packages, with their ends protected with board. Individual packages are wrapped with heat shrinkable film. Individual packages form a pallet of 2620 x 860 x 780 mm (see the drawing)
Packaging materials:
- lower spacer nailed of chipboard or other material with a height not less than 80 mm and length
- lower and upper casing board with a size not less than 780 x 2620 mm
- casing board ( 2 pieces)
- upper spacer
- stretch film
- steel tape
- info label
PARAMETERS:
| Length tolerance | +/- 4,0 mm |
| Width tolerance | +/- 0,5 mm |
| Thickness tolerance | +/- 0,2 mm |
| Squareness tolerance, % | max. 0,5 |
| Groove depth | 8,5 mm +/- 0,1 mm |
| Groove width | 3,5 mm +/- 0,2 mm |
| Tongue thickness | 2,5 mm |
| Tongue width | 16 mm |
TECHNICAL DATA:
| Parameter | unit | Perfect Panel |
|---|---|---|
| Thickness | mm | 7 |
| Size of panel | mm | 2600 x 150 |
| Number of panels per package | piece | 9 |
| Number of panels per pallet | piece | 495 |
| Number of packages per pallet | piece | 55 |
| Surface per package | m2 | 3,51 |
| Surface per pallet | m2 | 193,05 |
| Parameter | unit | Prestige Collection |
|---|---|---|
| Thickness | mm | 7 |
| Size of panel | mm | 2600 x 250 |
| Number of panels per package | piece | 6 |
| Number of panels per pallet | piece | 288 |
| Number of packages per pallet | piece | 48 |
| Surface per package | m2 | 3,9 |
| Surface per pallet | m2 | 187,2 |
ADVANTAGES:
- high aesthetic qualities,
- durability,
- ease of installation,
- low installation and maintenance costs,
- no need for special wall preparations,
- no need for maintenance.
The wall panels are supplemented with mouldings made from MDF profiled during the milling process and coated with a film corresponding to the wall panels in terms of colour and pattern. The mouldings with various profiles are used to finish the panels laid on corners, edges and joints to improve the aesthetic appearance of walls.
